人人妻人人插视频_精品在免费线_久久精品一区视频_波多野结衣强奷系列在线观看_超碰91在线观看_日本精品免费观看

DIS-IP200日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP50日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP5日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

DIS-IP05日本CEDAR扭力測試儀

TORQUE TESTER  DIS-IP series
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
Accuracy ±0.5%     (499 or less digit±3digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring mode P-P  Peak Peak load value hold.
T-R  Track Indication of real time torque value.
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 180 second .
Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero Easy Zero-Adjustment with pressing CLEAR button
Data spec. Data transfer ASCII fomat (Baud rate :19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time about 3 hours
Continunous working time 12 hours
Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight Meter part    520g
Code length Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories  (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure
Detection machine outside figure
Form IP05/5 IP50 IP200 IP500 Detector
Φ40 Φ50 Φ60 Φ80
41.2 63 73 99
5 10 10 15.5
Φ60 Φ90 Φ110 Φ140
Φ50 Φ74 Φ90 Φ116
(Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
weight 189g 632g 1.8kg 3kg

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板: 久久频这里精品99香蕉 | 怡红院成人在线 | 狠狠操夜夜爱 | 成人精品综合 | 精品国产国产综合精品 | 99久久精品久久久久久清纯 | 绯色av一区二区三区在线高清 | 国产特级淫片免费看 | 欧美亚洲另类丝袜综合网 | 欧美a级在线免费观看 | 国产精品va在线观看手机版 | 九九色在线 | 99久久www免费人成精品 | 日本三极 | 国产美女mm131爽爽爽爽 | 干美少妇| 亚洲精品无码永久在线观看男男 | 国产产品亚洲产品 | 久久在线视频免费观看 | 午夜欧美一区二区三区免费观看 | 午夜视频欧美 | 一个色综合久久 | 久久怡红院| 亚洲欧美在线综合 | 人妻aⅴ中文字幕无码专区 亚州av片 | 高潮流白浆潮喷免费视频 | 欧美精品国产日韩诱惑 | 亚洲第一页综合 | 一区二区三区午夜无码视频 | 冲田杏梨AV天堂一区二区三区 | 国产精品日本欧美一区二区三区 | 99无码人妻一区二区三区免费 | 午夜伦理一区二区 | 永久免费无码a片在线观看 一级日本 | 91性高潮久久久久久久久 | 国产美女被爽到高潮免费A片 | 国产亚洲精品久久久久久动漫 | 亚洲91在线 | 国产精品不卡av在线观看 | 永久免费在线 | 无码潮喷a片无码高潮 |